|
|
 |
|
|
|
How Does it Work?
Getting to the issue of ‘how it works’, the secret of the Fuel Genie is in the angled
fins that create a vortex effect, thereby increasing the speed and pressure of the air entering the piston chamber. The additional
air results in an increased ‘burn percentage’ of the fuel, thereby resulting in increased horsepower, fuel mileage
and decreased emissions, given that less combustible material is leaving the exhaust pipe. Brian Leuenberger describes it
as such: “It’s a venturi (air accelerator) combined with a vortex (fuel atomizer). In short, the part is a non-moving
turbo-charger, super-charger, blower. All we do is change the angular velocity of the air to create more airflow into the
cylinder head chamber. So you’re getting a little hotter, cleaner burn, creating horsepower. And when you’re burning
all the fuel in the cylinder, you’ve got cleaner ignition because the fuel is no longer expelled out your exhaust.”
|
|
|
|
|
|
|
|
|
|
|
|
To learn more about our products please contact us;
UNIDEM Sales Inc.
8 – 1288 Ritson Rd. N.
Box 240, Oshawa Ont., L1G 8B2
Telephone: 905-263-8645, Fax: 905-263-2444, Toll-free: 1-866-228-6173
|
|
|
|
Raise vehicle hood. Locate Air Intake Hose (this hose runs from the Air Filter box to the engine). Loosen the
clamp which holds the hose to the Air Filter box.
Insert The Fuel Genie small-end-first into the air hose or hard plastic housing which runs toward the engine's
butterfly. The desired distance from the engine is 4 to 8 inches (10-20cm) if possible. If this is not possible install the
Genie in the hose until you feel it fits snug in the hose or plastic housing. In some cases The Fuel Genie may also be installed
in the air filter box's hard plastic housing. NOTE: if The Fuel Genie does not fit snug you may have the wrong size Genie.
If this is the case DO NOT INSTALL - RETURN IT FOR THE CORRECT SIZE. The Fuel Genie must be snug so as not to interfere with
the engine's butterfly.
Replace hose on air filter housing and re-tighten clamp.